How to configure the camera with WiFi

Installation method of explosion-proof distribution box: Tools required for installation of explosion-proof distribution box: screwdriver, adhesive tape, standby device and connecting nut. The following are specific installation methods for customers' reference.    

1. To cut off the power supply first, please remove the corresponding fuse or trip the corresponding circuit breaker. For safety reasons, you can also operate the main switch to cut off the main power supply in the workshop.     

2. In most factories, there are two wires in the circuit. Connect the black wire with the black wire and the white wire with the white wire, and then connect the remaining grounding wire (see the manufacturer's instructions on wiring color coding and recommended installation steps of the explosion-proof distribution box. Use the connecting nut to connect, and check whether it is firm after connection.     

3. Check the wiring, refer to the manufacturer's instructions, and then carefully push all wires into the junction box (metal box or plastic box for electrical connection).   

4, according to the explosion-proof distribution box manufacturer's instructions, connect the distribution box to the junction box or hook.     

5. Re-energize the circuit and test the installation effect. Actually, we can all do it ourselves. But please be sure to take corresponding safety precautions, and contact professionals or call our factory to ask if necessary.